KTR DATAFLEX 110 Series, Operating & Assembly Instructions

Page: 2 / 22

DATAFLEX
®
110/...
Torque Measuring Shaft
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 49018 EN
2 of 22
1
Please observe protection
note ISO 16016.
Drawn: 2017-08-02 Pz/Da Replacing: ---
Verified: 2017-08-03 Pz Replaced by:
DATAFLEX
®
is a maintenance-free torque measuring shaft with integrated speed measurement.
Combined with the steel lamina coupling RADEX
®
-N the complete system forms a torsionally stiff,
double-cardanic coupling with integrated measuring shaft.
1 Technical data 3
2 Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 5
2.4 Intended use 6
3 Storage, transport and packaging 6
3.1 Storage 6
3.2 Transport and packaging 6
4 Assembly 7
4.1 Components of DATAFLEX
®
torque measuring shaft 7
4.2 Advice for finish bore 8
4.3 Displacements - alignment of the torque measuring shaft 8
4.4 Assembly of the hubs 9
4.5 Assembly of the RADEX
®
-N clamping ring hubs on the DATAFLEX
®
torque measuring
shaft 9
4.6 Assembly of hubs on the driving and driven side 10
4.7 Assembly of the lamina sets, RADEX
®
-N size 135 11
4.8 Assembly of the lamina sets, RADEX
®
-N size 156 11
4.9 Tightening torques of screw connections on the lamina set 12
4.10 Advice for assembly of the DATAFLEX
®
torque measuring shaft 13
4.11 Technical description 13
5 Disposal 21
6 Maintenance and service 21
7 Services, customer service addresses 21
8 EC Certificate of conformity 22
Table of contents