DATAFLEX
®
110/...
Torque Measuring Shaft
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
49018 EN
17 of 22
1
Please observe protection
note ISO 16016.
Drawn:
2017-08-02 Pz/Da
Replacing:
---
Verified:
2017-08-03 Pz
Replaced by:
Output circuit (connection N1 and N2)
The speed outputs N1 and N2 have short-circuit proof push-
pull outputs providing a square-wave voltage with an
amplitude of 24V and a maximum switching current of 30 mA.
The output terminals must not be charged with an external
voltage (see illustration 23).
The output voltage of speed lines and torsional direction line
can be varied by modifying the jumper position in the
connection housing to 5V level (see illustration 24).
Illustration 23: Output circuit of speed outputs
Illustration 24: Modification of voltage level for the speed signal/direction signal
4
Assembly
4.11 Technical description
