DATAFLEX
®
110/...
Torque Measuring Shaft
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
49018 EN
16 of 22
1
Please observe protection
note ISO 16016.
Drawn:
2017-08-02 Pz/Da
Replacing:
---
Verified:
2017-08-03 Pz
Replaced by:
d) Speed signals N1, N2, N-U, R/L (No. 1, 3, 7, 9)
The connection housing DF2 has 4 connections
for speed output:
- Two square-wave signals shifted by 90
degrees (N1, N2)
- A scalable voltage output (N-U) with direction
signal (R/L)
Illustration 20
Outputs N1 and N2
Each of the speed outputs N1 and N2 provide a square-wave signal with a resolution of 2x720 periods per
revolution (illustration 21).
Illustration 21
The speed is calculated as follows:
N [rpm] = f [Hz] / 7.5
The speed channel signals N1 and N2 have a phase shift of 90 degrees to each other. Depending on the
rotational direction one of the two signals leads 90° in phase (illustration 22).
Clockwise
Illustration 22
4
Assembly
4.11 Technical description
