KTR-Group BoWex junior plug-in, Operating & Assembly Instructions

Page: 2 / 22

BoWex
®
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 40110 EN
2 of 22
16
Please observe protection
note ISO 16016.
Drawn: 2019-07-01 Pz/Wb Replacing: KTR-N dated 2017-01-02
Verified: 2019-07-23 Pz Replaced by:
The BoWex
®
curved-tooth gear coupling is a flexible shaft connection. It is able to compensate for shaft
misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc.
1 Technical data 3
2 Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 5
2.4 Intended use 6
2.5 Coupling selection 6
2.6 Reference to EC Machinery Directive 2006/42/EC 6
3 Storage, transport and packaging 7
3.1 Storage 7
3.2 Transport and packaging 7
4 Assembly 7
4.1 Components of the couplings 7
4.2 Advice for finish bore 9
4.3 Assembly of the hubs 10
4.4 Displacements - alignment of the couplings 11
5 Start-up 12
6 Breakdowns, causes and elimination 13
7 Disposal 15
8 Spares inventory, customer service addresses 15
9 Enclosure A
Advice and instructions regarding the use in potentially explosive atmospheres 16
9.1 Intended use in potentially explosive atmospheres 16
9.2 Inspection intervals for couplings in potentially explosive atmospheres 17
9.3 Inspection of torsional backlash 18
9.4 Standard values of wear 19
9.5 marking of coupling for potentially explosive atmospheres 20
9.6 EU Certificate of conformity 22
Table of contents