3
WORK
8
V00132-10
–
Pull the front part of the mask spoiler laterally out of the supports.
V00133-10
–
Carefully remove catch
upward from bracket
.
Info
Pay attention to the turn signal cable.
–
Repeat these steps on the opposite side.
3.6
Positioning the mask spoiler
V00125-10
–
Push two rear catches
on the mask spoiler into supports
provided.
–
Push the mask spoiler up and position catch
in bracket
.
Info
Ensure that the turn signal cable is placed correctly.
Carefully push the mask spoiler up to avoid breaking the component or
bending catch
.
Make sure that the rear catches on the mask spoiler remain in the supports
provided.
V00111-11
–
Push the front part of the mask spoiler laterally into the supports.
V00091-11
–
Mount and tighten screw
.
Guideline
Screw, mask spoiler
M5x17
3.5 Nm
(2.58 lbf ft)
M00858-11
–
Mount and tighten screw
.
Guideline
Screw, mask spoiler
M5x17
3.5 Nm
(2.58 lbf ft)
–
Repeat these steps on the opposite side.
