KTM Super Adventure 2016, Setup Instructions

Page: 15 / 25

3 WORK
13
M00610-10
–
Disconnect negative cable

from the battery.
–
Disconnect positive cable

from the battery.
–
Take the battery and battery case  out of the battery compartment.
3.14 Installing the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Caution
Danger of accidents If the vehicle is operated with a discharged battery or without a battery, electronic components and safety
equipment may be damaged.
–
Never operate the vehicle with a discharged battery or without a battery.
M00610-11
Main work
–
Position the battery in battery case

.
Guideline
The even side of the battery case must be opposite the poles.
–
Position the battery and battery case in the battery compartment.
–
Position the positive cable  and mount and tighten the screw.
Guideline
Screw, battery terminal M6 4.5 Nm
(3.32 lbf ft)
–
Position the negative cable

and mount and tighten the screw.
Guideline
Screw, battery terminal M6 4.5 Nm
(3.32 lbf ft)
S00736-10
–
Close the cover

and push down slightly.
The cover engages with an audible click.
Finishing work
–
Mount the front rider's seat. ( p. 7)
–
Mount the passenger seat. ( p. 6)
–
Set the time and date.