KTM Super Adventure 2016, Setup Instructions

Page: 14 / 25

3 WORK
12
311910-10
Main work
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger
XCharge-professional
EU (00029095050)
Battery charger XCharge-professional US (00029095051)
Battery charger XCharge-professional GB (00029095052)
Battery charger XCharge-professional CH (00029095053)
Info
Follow the charger's instructions exactly.
–
Switch off the battery charger after charging and disconnect from the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
Finishing work
–
Install the battery. ( p. 13)
–
Mount the front rider's seat. ( p. 7)
–
Mount the passenger seat. ( p. 6)
–
Set the time and date.
3.13 Removing the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Caution
Danger of accidents If the vehicle is operated with a discharged battery or without a battery, electronic components and safety
equipment may be damaged.
–
Never operate the vehicle with a discharged battery or without a battery.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the passenger seat. ( p. 6)
–
Remove the front rider's seat. ( p. 6)
S00737-10
Main work
–
Pull locking mechanism

in the direction of the arrow.
–
Fold open cover

.