KTM RC 390 Page 48 Owner'S Manual Download

Page: 48 / 200

COMBINATION INSTRUMENT

7.11

Riding time/average speed menu

401334-01

Condition
Alternative 1

• The ignition is on.
• The motorcycle is stationary.

Alternative 2

• The ignition is on.
• The motorcycle is moving.

–

Press the

SET

button briefly and repeatedly until the desired info display appears.

The riding time and average speed are displayed in this menu.

Info

If the ignition was switched off for over 60 minutes, the display is reset to 0.

Press the

SET

button

briefly.

Next display mode on the info display

7.12

Average speed/average fuel consumption 1 menu

401465-01

Condition
Alternative 1

• The ignition is on.
• The motorcycle is stationary.

Alternative 2

• The ignition is on.
• The motorcycle is moving.

–

Press the

SET

button briefly and repeatedly until the desired info display appears.

Summary of Contents for RC 390









































































































































































































Search results

Summary of Contents for RC 390

Reviews:

Related manuals for RC 390

Brands by name

Popular brands

KTM RC 390, Owner'S Manual

Search results

Summary of Contents for RC 390

Reviews:

Related manuals for RC 390

Brands by name

Popular brands