KTM RC 390, Owner'S Manual

Page: 185 / 200

23 TECHNICAL DATA
183
Screw, rear brake disc M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, retaining bracket on fuel tank M8 13 Nm (9.6 lbf ft)
–
Screw, shift lever M8 17 Nm (12.5 lbf ft) Loctite ® 243™
Screw, top triple clamp M8 15 Nm (11.1 lbf ft)
–
Screw, front brake caliper M8x1 30 Nm (22.1 lbf ft) Loctite ® 204™
Nut, rear sprocket screw M8x1.25 27 Nm (19.9 lbf ft) Loctite ® 243™
Banjo bolt, brake line M10 24 Nm (17.7 lbf ft)
–
Fitting side stand M10 35 Nm (25.8 lbf ft) Loctite ® 243™
Remaining nuts, chassis M10 50 Nm (36.9 lbf ft)
–
Remaining screws, chassis M10 45 Nm (33.2 lbf ft)
–
Fitting, shock absorber, bottom M10x1.25 50 Nm (36.9 lbf ft)
–
Nut, turn signal M10x1.25 6 Nm (4.4 lbf ft)
–
Screw, front footrest bracket / engine
bearer M10x1.25 47 Nm (34.7 lbf ft)
–
Screw, side stand bracket M10x1.25 33 Nm (24.3 lbf ft) Loctite ® 243™
Stud, rear sprocket M10x1.25 50 Nm (36.9 lbf ft)
–
Nut, rear wheel spindle M14x1.5 90 Nm (66.4 lbf ft)
–
Nut, swingarm pivot M14x1.5 100 Nm (73.8 lbf ft)
–
Screw, steering head, top M16x1.5 53 Nm (39.1 lbf ft)
Loctite
®
204™
Lambda sensor M18x1.5 19 Nm (14 lbf ft)
–
Swingarm bearing adjusting ring M22x1 Tighten and ensure that there
is no play
–