KTM RC 390, Owner'S Manual

Page: 115 / 200

14 WHEELS, TIRES
113
14.1 Removing the front wheel
Preparatory work
–
Raise the motorcycle with the rear wheel stand. ( p. 78)
–
Raise the motorcycle with the front wheel stand. ( p. 79)
L02277-10
Main work
–
Remove screws  and push the fender to the side.
–
Remove screw

and pull wheel speed sensor

out of the hole.
–
Loosen screw

and screws

.
–
Unscrew screw

about 6 turns and press your hand on the screw to push the wheel
spindle out of the axle clamp. Remove screw

.
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
–
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
Info
Do not pull the hand brake lever when the front wheel is removed.