KTM RC 390, Owner'S Manual

Page: 117 / 200

14 WHEELS, TIRES
115
M00463-10
–
Clean the thread of the wheel spindle and screw

.
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M8 26 Nm
(19.2 lbf ft)
–
Position wheel speed sensor

in the drill hole. Mount and tighten screw

.
Guideline
Screw, wheel speed sensor holder M6 7 Nm (5.2 lbf ft)
–
Mount and tighten screws

.
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
–
Take the motorcycle off of the front wheel stand. ( p. 80)
–
Pull the front brake and compress the fork forcefully a few times.
The fork legs straighten.
–
Tighten screws

.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
Finishing work
–
Take the motorcycle off of the front wheel stand. ( p. 80)
–
Take the motorcycle off of the rear wheel stand. ( p. 78)