KTM Freeride E-XC NG 2018, Owner'S Manual

Page: 66 / 151

13 SERVICE WORK ON THE CHASSIS
64
A00184-11
–
Tighten screws
8
.
Guideline
Screw, top triple
clamp M8 22 Nm (16.2 lbf ft)
A00187-10
–
Attach the brake line and wiring harness. Close holder
9
.
A00183-11
–
Position the brake caliper. Mount and tighten screws
bk
with
the spacers.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
bl
.
–
Connect plug-in connector and mount the cable tie(s).
Finishing work
–
Install front fender. ( p. 67)
–
Install the headlight mask with the headlight. ( p. 102)
–
Install the front wheel. ( p. 91)
–
Check that the cable and brake lines are routed correctly.
–
Check the play of the steering head. ( p. 64)
–
Remove the motorcycle from the lift stand. ( p. 57)
–
Install the KTM PowerPack. ( p. 108)
–
Lock the seat. ( p. 69)
–
Check the headlight setting. ( p. 105)
13.11 Checking the play of the steering head
Warning
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and dam-
ages components.
–
Correct incorrect steering head bearing play immediately. (Your authorized KTM workshop will be glad
to help.)