KTM Freeride E-XC NG 2018, Owner'S Manual

Page: 92 / 151

14 BRAKE SYSTEM
90
C00733-01
–
Position new brake linings.
Info
Always change the brake linings in pairs.
C00732-11
–
Position retaining spring
6
.
–
Mount pin 5 .
Info
To make it easier to mount the pin, push the retainer
spring down.
Make sure the retaining spring is seated correctly.
–
Mount cotter pins
4
.
–
Operate the rear brake lever several times until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
A00201-12
–
Fill up the brake fluid to the level A .
Guideline
Level
A
(brake fluid level
below reservoir rim)
5 mm (0.2 in)
Brake fluid DOT 4 / DOT 5.1 ( p. 137)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Install the KTM PowerPack. ( p. 108)
–
Lock the seat. ( p. 69)