KTM Freeride E-XC NG 2018, Owner'S Manual

Page: 62 / 151

13 SERVICE WORK ON THE CHASSIS
60
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 139)
–
Press the dust boots back into their normal position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. ( p. 59)
–
Remove the motorcycle from the lift stand. ( p. 57)
–
Install the KTM PowerPack. ( p. 108)
–
Lock the seat. ( p. 69)
13.7 Removing the fork legs
Preparatory work
–
Deactivate the vehicle. ( p. 43)
–
Fold the seat up. ( p. 69)
–
Remove the KTM PowerPack. ( p. 107)
–
Mount the covering cap. ( p. 71)
–
Raise the motorcycle with a lift stand. ( p. 57)
–
Remove the front wheel. ( p. 91)
–
Remove the headlight mask with the headlight. ( p. 101)
A00181-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove the cable tie(s) and detach plug-in connector.
–
Remove screws
2
with the spacers and take off the brake
caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
A00182-10
–
Loosen screws
3
. Take out the left fork leg.
–
Loosen screws
4
. Take out the right fork leg.