9 SERVICE SCHEDULE
24
9.1
Service schedule
Every 20 operating hours
Once after 1 operating hour
Read out the fault memory using the KTM diagnostics tool.
○
●
Check and charge the 12-V battery.
●
Check and charge the KTM-PowerPack.
○
●
Check the front brake linings.
●
Check the rear brake linings.
●
Check the brake discs.
●
Check the brake lines for damage and leakage.
●
Check the frame and swingarm.
●
Check the heim joints at the top and bottom of the shock absorber.
●
Check the tire condition.
○
●
Check the tire air pressure.
○
●
Check the wheel bearing for play.
●
Check the wheel hubs.
●
Check the rim run-out.
○
●
Check the spoke tension.
○
●
Check the chain, rear sprocket, engine sprocket and chain guide.
●
Check the chain tension.
○
●
Grease all moving parts (e.g., side stand, hand lever, chain, ...) and check for smooth operation.
○
●
Check the brake fluid level of the front brake.
●
Check the rear brake fluid level.
●
Check the travel of the brake levers.
●
Check the steering head bearing play.
○
●
Check all hoses and bellows for cracking, leaks and incorrect routing.
○
●
Check the antifreeze and coolant level.
○
●
Check the cables for damage and routing without sharp bends.
●
Check the sealing lips on the discharging plug for damage.
○
●
Check the screws and nuts for tightness.
○
●
Final check: Check the vehicle for safe operation and take a test ride.
○
●
Read out the fault memory using the KTM diagnostics tool after a test ride.
○
●
Make the service entry in
KTM DEALER.NET
and in the service record.
○
●
○
One-time interval
●
Periodic interval
9.2
Service work (as additional order)
Annually
Every 60 operating hours
Once after 20 operating hours
Change the front brake fluid.
●
Change the rear brake fluid.
●
Grease the steering head bearing.
●
Change the sealing lips on the discharging plug.
●
Perform a fork service.
○
●
Service the shock absorber.
●
Check the swingarm bearing.
●
Change the gear oil.
●
