12 SERVICE WORK ON THE CHASSIS
95
E00339-10
–
Inject the liquid into the system until it escapes from open-
ings
6
of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim
4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
12.47
Removing the engine guard (EXC
‑
F AU, EXC
‑
F Six Days)
H01638-10
–
Remove screws
1
and engine guard.
12.48
Installing the engine guard (EXC
‑
F AU, EXC
‑
F Six Days)
H01638-10
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
