18 SERVICE WORK ON THE ENGINE
139
K00567-10
Main work
–
Place a suitable container under the engine.
–
Remove oil drain plug
1
with the magnet and seal ring.
Info
Do not remove screws
2
.
K00568-10
–
Remove screw plug
3
with oil screen
4
and the O-rings.
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
K00569-10
–
Position oil screen
4
with the O-rings on a pin wrench.
–
Position the pin wrench through the drilled hole of the screw
plug in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
K00570-10
–
Mount and tighten screw plug
3
with the O-ring.
Guideline
Screw plug, oil screen
M20x1.5
15 Nm (11.1 lbf ft)
–
Mount and tighten oil drain plug
1
with the magnet and a
new seal ring.
Guideline
Oil drain plug with
magnet
M12x1.5
20 Nm (14.8 lbf ft)
K00571-10
–
Remove screws
5
. Remove the oil filter cover with the O-ring.
