KTM F8203R2, Owner'S Manual, Page: 123 / 174

15 ELECTRICAL SYSTEM
121
E00394-10
Main work
–
Pull engine electronics control unit 1 from the holder and
hang it to the side.
E00395-10
–
Open fuse box cover
2
.
–
Remove the defective fuse.
Guideline
(All EU models)
Fuse 1
‑
10 A
–
EFI control unit, lambda sensor, com-
bination instrument, combination switch (optional), fuel
injection, diagnostics connector, fuse
4
(EXC
‑
F AU, All BR models)
Fuse 1
‑
10 A
–
EFI control unit, combination instru-
ment, combination switch (optional), fuel injection,
diagnostics connector, fuse
4
Fuse 2
–
10 A
–
high beam, low beam, parking light, tail
light, license plate lamp
Fuse
3
–
5 A
–
fuel pump
Fuse 4
–
10 A
–
radiator fan (optional), horn, brake light,
turn signal
Fuses
res - 10 A - spare fuse
Info
You can recognize a faulty fuse by a burned-out fuse
wire
A .
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) ( p. 155)
Fuse (75011088005) ( p. 155)
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.