2 SETUP
4
H02474-10
(All EXC models)
–
Position the turn signal indicator lamp
1
in the com-
bination instrument bracket.
E00850-10
Condition
Packaging
V12
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling
over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you
have finished.
–
Remove the separate enclosure and unpack it. Check that
the scope of supply is complete using the enclosed pack-
ing list.
Info
The procedure for missing components is described
in the Customer Service Manual.
–
Have a lift stand available.
Lift stand (78129955100)
–
Remove the two cable ties on the triple clamp.
402051-01
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
Info
The procedure in the event of transport damage is
described in the Customer Service Manual.
–
Install the shock absorber. (
H02537-10
(All EXC models)
–
Position the connector board and combination instru-
ment on the upper triple clamp.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6
10 Nm
(7.4 lbf ft)