KTM F7303U2, Setup Instructions

Page: 19 / 51

SETUP 2
17
S03695-10
–
Mount the washer and splint
cn
.
S03696-11
–
Position the frame protectors on both sides.
–
Hook in the frame protector in area
J
.
–
Mount and tighten screws
co
.
Guideline
Screw, frame protec-
tor M5 3 Nm (2.2 lbf ft)
–
Mount and tighten screws
cp
with washers.
Guideline
Screw, frame protec-
tor M5 3 Nm (2.2 lbf ft)
–
Mount the cable ties.
(All special models)
–
Install the engine guard. ( p. 37)
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying
KTM PowerParts
fitting instruc-
tions.
–
Make sure that the reflectors are glued on to the left and right
fork leg.
H02556-01
Info
The reflectors must not be covered by trim parts.
–
Attach the stickers included in the scope of supply (optional).
–
Set the kilometers or miles. ( p. 40)
–
Adjust combination instrument function. ( p. 41)
–
Set the clock. ( p. 41)
–
Add 2-stroke oil. ( p. 38)
–
Refuel. ( p. 39)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
–
Prepare the vehicle according to the specifications in
KTM Dealer.net
for handover to the customer.