KTM F5375T5 Owner'S Manual Download

Page: 82 / 287

7 COMBINATION INSTRUMENT

Press and
hold the

SET

button for at
least 3 sec-
onds.

All the entries in the

Trip 2

menu are reset.

7.17.13 Warning

V01167-01

Condition

• Message or warning is present.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Trips/Data

is marked. Press

the

SET

button to open the menu.

–

Press the

DOWN

button until

Warning

is marked. Press

the

SET

button to open the menu.

–

Use the

DOWN

button to navigate through the warnings.

All the warnings that have occurred are displayed and stored in
the

Warning

menu.

Summary of Contents for F5375T5
































































































































































































































































































Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands

KTM F5375T5, Owner'S Manual

Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands