KTM F5375T5 Page 151 Owner'S Manual Download

Page: 151 / 287

SERVICE WORK ON THE CHASSIS 13

149

Note

Environmental hazard

Hazardous substances cause environmental damage.

–

Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.

Info

The service life of the chain depends largely on its maintenance.

Preparatory work

–

Raise the motorcycle with the rear lifting gear. (

p. 139)

400725-01

Main work

–

Clean the chain regularly.

–

Rinse off loose dirt with a soft jet of water.

–

Remove old grease remains with chain cleaner.

Chain cleaner (

p. 271)

–

After drying, apply chain spray.

Street chain spray (

p. 272)

Finishing work

–

Remove the rear of the motorcycle from the lifting gear.
(

p. 139)

Summary of Contents for F5375T5
































































































































































































































































































Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands

KTM F5375T5, Owner'S Manual

Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands