KTM F5375T5 Page 169 Owner'S Manual Download

Page: 169 / 287

BRAKE SYSTEM 14

167

400480-10

–

Check the front and rear brake disc thickness at multiple
points for the dimension

Info

Wear will reduce the thickness of the brake disc at con-
tact surface

of the brake linings.

Brake discs - wear limit

front

4.5 mm (0.177 in)

rear

3.6 mm (0.142 in)

» If the brake disc thickness is less than the specified value.

–

Change the front brake disc.

–

Change the rear brake disc.

–

Check the front and rear brake discs for damage, cracking, and
deformation.
» If the brake disc exhibits damage, cracking, or deforma-

tion:

–

Change the front brake disc.

–

Change the rear brake disc.

Summary of Contents for F5375T5
































































































































































































































































































Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands

KTM F5375T5, Owner'S Manual

Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands