KTM 690 Enduro R USA, Owner'S Manual

Page: 129 / 207

14 ELECTRICAL SYSTEM
127
B01975-10
–
Disconnect negative cable

of the battery.
–
Take off the positive terminal cover

and disconnect the positive cable from the bat-
tery.
–
Remove screws

.
–
Pull retaining bracket

of the battery forward and remove it.
–
Lift the battery up and out.
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. The vehi-
cle is therefore no longer roadworthy.
14.2 Installing the battery
x
B01975-11
Main work
–
Insert the battery into the battery compartment with the terminals facing rearward.
Battery (YTZ10S) ( p. 186)
–
Position retaining bracket  and mount and tighten screws  .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the positive cable and mount and tighten the screw.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position positive terminal cover  .
–
Position negative cable

and mount and tighten the screw.