KTM 690 Enduro R USA, Owner'S Manual

Page: 151 / 207

15 COOLING SYSTEM
149
Alternative 2
Coolant (mixed ready to use) ( p. 193)
–
Mount the radiator cap.
15.4 Draining the coolant
x
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
Warning
Danger of poisoning
Coolant is poisonous and a health hazard.
–
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water immedi-
ately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swallowed,
contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of children.
Preparatory work
–
Remove the engine guard. ( p. 94)
600616-10
Main work
–
Stand the motorcycle upright.
–
Place a suitable container under the engine.
–
Remove screw  . Take off the radiator cap.
–
Completely drain the coolant.
–
Mount screw

with a new seal ring and tighten it.