KTM 690 Enduro R AU/GB 2014, Setup Instructions

Page: 7 / 18

2 SETUP
5
B00250-10
–
Insert the rubber sleeves

in the footrest bracket.
–
Position the engine guard. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Operation as 2-seater
–
Fit the rear footrest bracket. ( p. 10)
Operation as 1-seater (at customer request only)
–
Mount the rubber strap for the side stand. ( p. 10)
Warning
Forfeiture of homologation and insurance cover The vehicle is
homologated as 2-seater. If the heel protector is fitted instead of the
footrest bracket, the vehicle no longer conforms to the homologation and
must not be operated in this form without alterations to the registration
papers.
–
Set up and operate the vehicle as a 2-seater or have changes made
to the registration papers.
–
Fit the heel protector. ( p. 10)
–
Refuel. ( p. 11)
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
–
Set kilometers or miles. ( p. 12)