KTM 690 Enduro R AU/GB 2014, Setup Instructions

Page: 16 / 18

4 TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS
14
Screw, connection lever on frame M8 30 Nm (22.1 lbf ft) Loctite ® 243™
Screw, foot brake lever M8 25 Nm (18.4 lbf ft)
Loctite
®
243™
Screw, fork stub M8 15 Nm (11.1 lbf ft)
–
Screw, front brake caliper M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, front footrest bracket M8 25 Nm (18.4 lbf ft)
–
Screw, fuel tank bracket M8 15 Nm (11.1 lbf ft)
–
Screw, fuel tank, bottom M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, fuel tank, top M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)
–
Screw, handrail M8 20 Nm (14.8 lbf ft)
–
Screw, heel protector M8x12 5 Nm (3.7 lbf ft) Loctite ® 243™
Screw, license plate holder, top M8 20 Nm (14.8 lbf ft)
–
Screw, main silencer clamp M8 12 Nm (8.9 lbf ft) Copper paste
Screw, main silencer holder M8 25 Nm (18.4 lbf ft)
–
Screw, main silencer holder on fuel
tank M8 25 Nm (18.4 lbf ft)
–
Screw, rear footrest bracket M8x16 25 Nm (18.4 lbf ft)
–
Screw, side stand bracket M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, spring holder on side stand
bracket M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, steering stem M8 20 Nm (14.8 lbf ft)
–
Screw, top triple clamp M8 17 Nm (12.5 lbf ft)
–
Engine carrying screw M10 45 Nm (33.2 lbf ft) Loctite ® 243™
Remaining nuts, chassis M10 45 Nm (33.2 lbf ft)
–
Remaining screws, chassis M10 45 Nm (33.2 lbf ft)
–
Screw, bottom shock absorber M10 45 Nm (33.2 lbf ft) Loctite ® 243™
Screw, engine bearer on frame M10 45 Nm (33.2 lbf ft)
–
Screw, handlebar support M10 40 Nm (29.5 lbf ft)
Loctite ® 243™
Screw, side stand M10 35 Nm (25.8 lbf ft) Loctite ® 243™
Screw, top shock absorber M10 45 Nm (33.2 lbf ft) Loctite ® 243™
Banjo bolt, brake line M10x1 20 Nm (14.8 lbf ft)
–
Screw, swingarm pivot M12 80 Nm (59 lbf ft)
–
Lambda sensor M12x1.25 25 Nm (18.4 lbf ft) Copper paste
Nut, linkage lever on swingarm M14x1.5 100 Nm (73.8 lbf ft)
–
Nut, linkage lever to rocker arm M14x1.5 100 Nm (73.8 lbf ft)
–
Screw, bottom steering head M20x1.5 60 Nm (44.3 lbf ft) Loctite ® 243™
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
–
Screw, front wheel spindle M24x1.5 45 Nm (33.2 lbf ft)
–
Nut, rear wheel spindle M25x1.5 90 Nm (66.4 lbf ft)
–