ENGLISH
27
Fuse (EXC)
The fuse
1
is disposed in the starter relay of the E-starter
2
underneath
the left side paneling.
Having removed the left side paneling, the air box cover and the protection
cover
A
, you will be able to see the fuse.
The following loads are connected to it:
– E-starter system
– horn
– flasher lights
The starter relay also contains a (10 amp) spare fuse
3
.
Replace a blown fuse only with an equivalent one. If a new fuse that has
just been set in gets blown again, you are strongly advised to have it
inspected by a KTM dealer.
The fuse capacity is 10 Ampere.
!
CAUTION
!
U
NDER NO CIRCUMSTANCES IS A STRONGER FUSE ALLOWED TO BE SET IN OR A FUSE
ALLOWED TO BE
“
REPAIRED
”. A
N INEXPERT TREATMENT COULD DAMAGE THE WHOLE
ELECTRICAL INSTALLATION
!
Replacing headlight lamp (H4)
Loosen both rubber bands
4
and tilt headlight mask to the front. Remove
bulb plug
5
and remove rubber cap
6
. Turn the supporting ring counter-
clockwise and remove it from the reflector together with the bulb.
Insert a new bulb such that the noses
7
fit into the recess
8
. Do not touch
the glass body of the bulb, to keep if free from grease. Mount supporting
ring, rubber cap and plug. Position headlight mask with the bottom holders,
and fasten it with the rubber bands.
1
2
3
A
4
5
6
7
8
