11
SERVICE WORK ON THE CHASSIS
38
V00273-10
–
Remove protective ring
.
–
Remove the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
11.10
Installing the lower triple clamp
601602-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper steering head
bearing
.
–
Check whether upper steering head seal
is correctly positioned.
–
Push on protective ring
.
V00282-10
–
Position the upper triple clamp with the handlebar.
–
Mount nut
, but do not tighten it yet.
H01162-12
(50 SX)
–
Position the fork legs.
Bleeder screws
are positioned toward the front.
Info
The second milled groove in the fork leg must be flush with the upper
edge of the upper triple clamp.
V00274-10
–
Tighten screws
.
Guideline
Screw, bottom triple clamp
M8
15 Nm
(11.1 lbf ft)
Summary of Contents for 50 SX 2017
Page 1: ...OWNER S MANUAL 2017 50 SX 50 SX Mini Art no 3213469en...
Page 2: ......
