KTM 1290 Super Adventure S 2018 Owner'S Manual Download Page 76

Page: 76 / 348

7 COMBINATION INSTRUMENT

7.17

Seat heater (optional)

F01269-17

When the seat heating is switched on, the

Heated Seat

symbol

appears in the

area of the display.

The seat heating can be configured in the

Heated Seat

menu.

Info

The heating level for the passenger seat heating can be
controlled by a switch next to the right grab handle.

7.18

Load display

F01269-18

The load condition setting is shown in the

area of the display.

The payload can be configured in the

Load

menu.

Summary of Contents for 1290 Super Adventure S 2018





























































































































































































































































































































































Search results

Summary of Contents for 1290 Super Adventure S 2018

Reviews:

KTM 1290 Super Adventure S 2018, Owner'S Manual, Page: 76 / 348

Search results

Summary of Contents for 1290 Super Adventure S 2018

Reviews: