KTM 1290 Super Adventure S 2018, Owner'S Manual

Page: 303 / 348

TROUBLESHOOTING 22
301
Faults Possible cause Action
Malfunction indicator lamp
lights up Fault in fuel injection system
–
Read out the fault memory using the
KTM diagnostics tool.
The ABS indicator lamp lights
up ABS fuse is blown
–
Change the fuses in the fuse box.
(
p. 264)
Wheel speeds of front and rear
wheels differ greatly
–
Stop, switch off the ignition, start
again.
Malfunction in ABS
–
Read out the fault memory using the
KTM diagnostics tool.
High oil consumption Engine oil level too high
–
Check the engine oil level. ( p. 279)
Engine oil too thin (low viscos-
ity)
–
Change the engine oil and oil filter and
clean the oil screens.
( p. 280)
The battery is discharged A power consumer is connected
to the socket/ACC1.
–
Disconnect the power consumer from
the socket/ACC1.
–
Recharge the battery. ( p. 255)
The hazard warning flasher is
switched on
–
Switch off the hazard warning flasher.
–
Recharge the battery. ( p. 255)
Battery is not charged by alter-
nator
–
Check the charging voltage.
Ignition was not switched off
when vehicle was parked
–
Recharge the battery. ( p. 255)