KTM 1290 Super Adventure S 2018 Owner'S Manual Download Page 223

Page: 223 / 348

BRAKE SYSTEM 14

221

» If the brake disc thickness is less than the specified value.

–

Change the front brake discs.

–

Change the rear brake disc.

–

Check the front and rear brake discs for damage, cracking, and
deformation.
» If the brake disc exhibits damage, cracking, or deforma-

tion:

–

Change the front brake discs.

–

Change the rear brake disc.

14.3

Checking the brake fluid level of the front brake

Warning

Danger of accidents

An insufficient brake fluid level will cause the brake system to fail.

If the brake fluid level drops below the

MIN

marking, the brake system is leaking or the brake linings are

worn down.

–

Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)

Summary of Contents for 1290 Super Adventure S 2018





























































































































































































































































































































































Search results

Summary of Contents for 1290 Super Adventure S 2018

Reviews:

KTM 1290 Super Adventure S 2018, Owner'S Manual, Page: 223 / 348

Search results

Summary of Contents for 1290 Super Adventure S 2018

Reviews: