KTM 1290 Super Adventure S 2018, Owner'S Manual, Page: 164 / 348

10 RIDING INSTRUCTIONS
162
Note
Transmission damage
Incorrect use of the quick will damage the transmission.
The quick can only be used if the function is enabled in the combination instrument.
The quick is not active if you pull the clutch lever.
–
Only use the quick in the permitted speed range shown.
Info
If you hear unusual noises while riding, stop immediately, switch off the engine, and contact an autho-
rized KTM workshop.
402299-11
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release the throttle while simultaneously pulling the clutch
lever, shift into the next gear, release the clutch lever, and
open the throttle.
Info
You can see the positions of the 6 forward gears in the
figure. The idle position is between the first and sec-
ond gears. First gear is used for starting off or for steep
inclines.
–
After reaching maximum speed by fully opening the throttle
grip, turn the throttle back so it is ¾ open. This will barely