-7-
Fiber Optic Interface (FX Port)
Signal Compliance
IEEE 802.3u 100BASE-FX
Connector
SC, ST, MT-RJ, VF-45, LC or Single SC
Data Speed
100Mbps
Duplex Mode
Full-duplex and optional half duplex
Cable Types
Multimode (MMF) - 50/125, 62.5/125
µ
m
Single mode (SMF) - 9/125
µ
m
Supported Link Distance
MMF up to 2km
SMF up to 100km
Single SMF WDM up to 40km
Eye Safety compliance
IEC825 Class 1
Loop Back Test Button (LOOP TEST)
PUSH
Start loop back test
RELEASE
Stop loop back test
User Accessible Settings (SW)
NO.
SETTING
STATE
FUNCTION
SW1
TP Port Configuration
OFF
Auto-negotiation (default)
ON
Forced mode
SW2
TP Port Duplex
OFF
Full duplex (default)
ON
Half duplex
SW3
TP Port Speed
OFF
100Mbps (default)
ON
10Mbps
SW4
Link Fault Pass Through
OFF
Disable (default)
ON
Enable
SW5
Auto-status-report
OFF
Disable (default)
ON
Enable
Optional Settings (User inaccessible JP1-JP3 on board)
NO.
SETTING
STATE
FUNCTION
JP1
Forwarding mode
Open
Store-and-forward (default)
Short
Smart-forward mode
JP2
802.3x function
Open
Enable (default)
Short
Disable
JP3
FX port duplex
Open
Full duplex mode (default)
Short
Half duplex mode
