Quick Installation Guide KNR-p4Px4 KVR-p16Px8
20
Record Settings
Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to the
user manual for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record. And
for other record types, you may refer to the user manual for detailed information.
Note:
After rebooting all the manual records enabled are canceled.
Instant Record
On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the window
when you click on it.
Click the
icon to enable the record, and the icon turns to
. And click
icon to disable the record, then the
icon turns to
.
All-day Record
Perform the following steps to set the all-day recording.
On the live view window, right-click the window and move the cursor to the Start Recording option, and select
Continuous Record or Motion Detection Record on your demand.
And click the
Yes
button in the popup Attention message box to confirm the settings. Then all the channels will start to
record in the selected mode.
Playback
Play back the record files of a specific channel in the live view menu. Channel switch is supported.
•
OPTION 1
