KT-Elektronik
SOL3-7
Modify parameters
The parameters are grouped by topics:
PA1: Heating circuit (1)
PA5: System-wide parameters
PA3: Solar circuit
PA6: Modbus communication
PA4: Auxilary heating / DHW circuit
Set rotary switch to configuration and parameter level;
Symbol parameter blink,
Display: key number
Turn rotary pushbutton;
Set valid key number
Push rotary pushbutton;
Display:parameter level 1
Push rotary pushbutton;
Display: parameter to check
Push rotary pushbutton; Symbol parameter blink,
Display: parameter to modify
Turn rotary pushbutton;
Modify parameter
Push rotary pushbutton; Confirm parameter
Display: further parameter; to adjust additional parameters, repeat above
Turn rotary pushbutton;
Modify further parameters or confirm 'End' to leave parameter level
Resetting to default values
All parameters and function blocks set over the rotary switch as well as parameters in PA parameter levels and function
blocks in CO configuration levels can be reset to their default settings (efactory default).
Set rotary switch to configuration and parameter level;
Symbol parameter blink,
Display: key number
Turn rotary pushbutton;
Set valid key number
I99 I
Push rotary pushbutton; Save default settings (WE), all display
elements will be activated for 2 seconds; Display: key number
Important key numbers
I732
Common parameters and configuration
I999
Enhanced information level
I995
Modify key number for common parameters and configuration
I99 I
Load factory defaults
0025
Modify FSR error mask
00 I0
Modify data logging cycle
0002
Software reset
KA_37387_SOL3-7_EN004
13
