Installation and Operation Manual
20
If there is long time button press happened when the display stays
in some page, then this page of display will be locked. In the same
way, long time button press can make a page of display switch
between lock and unlock status. The LCD display will return to the
first page “Power & Etotal” automatically if there is no any button
press operation for a long time and the LCD is not in lock status.
“Auto Test Set” display page will only be shown when the inverter
is set to “Italy” mode.
3. Setting Mode Display
The inverter could enter the setting mode by long time button press
when "MENU" showed on the LCD. The long time button press can
make the display return to the upper level menu or exit the setting
mode ,when the cursor point to the title of a page(top line of the
page).
●
Setting Main Menu
Setting Option
1.Grid SPEC
2.PV Input Mode
3.Run Setting
Setting Option
7.Statistic
8.Date/Time
9.Factory Burn
Setting Option
4.COMM Address
5.485 Protocol
6.Record Operation
Setting Option
10.Wifi Reset
11.Factory Reset
Short time button press move
the cursor, and long time
button press enter the sub
menu.
