INSTALL TCS1 FINGERPRINT READER
1.
Expose underside of top housing
2.
Use tweezers to carefully open “drawer”
(CON 2) affixed to the fingerprint daughter board
–
opening one side first, then the other (only partway), until enough space is available to insert the
TCS1 FPC (CON 3) into CON 2 fingerprint processor slot
3.
Use tweezers or a thumbnail to close the “drawer” and secure FPC into CON 2
4.
Lay a blue gasket around the rim of the TCS1; precision placement is important
5.
Hold the TCS1 together with blue gasket in your right hand
6.
Flip the top housing face up with your left hand while holding the TCS1 with gasket on the
underside of the top housing with your right
7.
Using fingers from both hands, guide the TCS1 with gasket into place in the biometric cutout
(Note: Handle TCS1 with care, as it can be easily scratched)
