PREPARE OEM-805N2AKU RFID READERS FOR INSTALLATION
1.
Unpackage each reader and discard all other components in the bag
2.
Lay out readers on work surface (Note: To prevent damage to processor boards, do not stack)
3.
Connect RFID cable to C1
4.
Align protrusion on black plastic RFID clip with the center hole located on the RFID processor board
5.
Snap black plastic clip to the underside of the reader, ensuring four clip hooks are secured to
reader processor board (without hooking or touching red antennae, or damaging any components
on the processor board)
STAGE AND TAPE READERS:
6.
Align individual assembled readers, adjacent each other in rows of ten, black clips facing up
7.
Leaving red liner in place, apply two strips of mounting tape to each row of clips as follows:
•
One strip along the top edge of the clips
•
A second strip running parallel, just below clip grooves
8.
Break the mounting tape between each reader; re-stage readers
