code R30020.100en www.kseniasecurity.com
ed.04/2020
By holding for 3 seconds the programming button on auxi wls, it exits from the programming mode of the
outputs and the device returns to the normal working mode. The led on device blinks at the exit of
programming mode, as at the start of programming.
NOTE: auxi wls have to be programmed one by one. DO NOT try to program more than one auxi at the same
time, to avoid conflicts.
INDEPENDENT
MONOSTABLE
BISTABLE
relay output 1
relay output 2
relay output 1
relay output 2
Short press on key 1 of opera
remote command. Once
pressed, the first relay
switches and the led on auxi
wls starts blinking each
second. This indicates that
auxi wls start counting the
monostable time. By pressing
again, the relay re-opens and
the led on auxi wls quickly
blinks 3 times to confirm the
configuration saving. The
monostable time is the time
elapsed between the two
press on key.
Short press on key 2 of opera
remote command. Once
pressed, the first relay
switches and the led on auxi
wls starts blinking each
second. This indicates that
auxi wls start counting the
monostable time. By pressing
again, the relay re-opens and
the led on auxi wls quickly
blinks 3 times to confirm the
configuration saving. The
monostable time is the time
elapsed between the two
press on key.
Long press on key 1.
The led on auxi wls
blinks 3 times to
confirm the
configuration saving.
Long press on key 2. The
led on auxi wls blinks 3
times to confirm the
configuration saving.
SPTD Change over switch
INTERLOCKED
MONOSTABLE
BISTABLE
MONOSTABLE
BISTABLE
Short press on key 0 of opera
remote control. Once
pressed, the first relay
switches and the led on auxi
wls starts blinking each
second. This indicates that
auxi wls start counting the
monostable time. By pressing
again, the relay re-opens and
the led on auxi wls quickly
blinks 3 times to confirm the
configuration saving.
The monostable time is the
time elapsed between the
two press on key.
Long press on key 0 of
opera remote control.
The led on auxi wls
quickly blinks 3 times
to confirm the
configuration saving.
Short press on key (i) of opera
remote command. Once
pressed, the first relay
switches and the led on auxi
wls starts blinking each
second. This indicates that
auxi wls start counting the
monostable time. By pressing
again, the relay re-opens and
the led on auxi wls quickly
blinks 3 times to confirm the
configuration saving. The
monostable time is the time
elapsed between the two
press on key.
Long press on key (i) of
opera remote control.
The led on auxi wls
quickly blinks 3 times to
confirm the
configuration saving.
