7 Operation
47 of 68
Hyamat SVP Eco
Table 33:
LED description
LED
Description
Red
One or more than one alert is active
Amber
One or more than one warning is active
Green
Steady light: Trouble-free operation
7.3 Adjusting the settings
7.3.1 Setting the setpoint
The pressure booster system is factory-set to the setpoint indicated on the rating
plate.
If the setpoint needs to be adjusted to site conditions, parameter 1-3-2 has to be
changed as required.
First, enter the customer password.
Then change the setpoint.
7.3.2 Changing the controller settings
The PI controller of the frequency inverter is optimised when leaving the factory,
therefore no changes are required.
Should a process-related adjustment of the PI controller be necessary, check/change
the factory settings in accordance with the PumpDrive operating manual.
Summary of Contents for Hyamat SVP Eco
Page 1: ...Pressure Booster System Hyamat SVP Eco Installation Operating Manual...
Page 66: ......
Page 67: ......
