KSB Hyamat SVP Eco, Installation & Operating Manual

Page: 15 / 68

4 Description
15 of 68
Hyamat SVP Eco
4.5 Design details
Design
▪
Fully automatic pressure booster package system
▪ Baseplate-mounted
▪ Two to six vertical high-pressure centrifugal pumps with variable speed control
▪ Hydraulic components made of stainless steel / brass
▪
1 check valve and 1 shut-off valve per pump set to DIN / DVGW
▪ Discharge-side, direct-flow membrane-type accumulator, approved for drinking
water
▪ Pressure gauge
▪ Pressure transmitters on the inlet side and discharge side
▪ Design and function as per EN 806-2, DIN 1988-500
Pressure booster system with Movitec 2B, 4B, 6B, 10B and 15B:
▪ Anti-vibration pads per pump
Pressure booster system with Movitec 25B, 40B, 60B and 90B:
▪
Level-adjustable feet and rubber pads (supplied but not fitted)
Installation
▪ Stationary dry installation
Drive
▪
High-efficiency, magnet-less KSB SuPremE motor
▪ Efficiency class IE4/IE5 to IEC TS 60034-30-2:2016
Automation
▪
Frequency inverter
▪
Control and monitoring system for the pumps integrated in the frequency
inverter
▪
Control panel (display, keys, LEDs, service interface)
▪ Motor protection switch per pump
▪ Lockable master switch (repair switch)
▪
Pressure transmitters on the inlet side and discharge side
▪ Circuit diagram to VDE and parts list for electric parts
▪ Terminal strip/terminals with identification for all connections
▪ Terminal connection for digital dry running protection
▪
Remote ON/OFF input
▪ Field bus connection (optional)