2 Safety
8 of 68
KSB Delta Solo / KSB Delta Eco
2 Safety
!
DANGER
All the information contained in this section refers to hazardous situations.
In addition to the present general safety information the action-related safety
information given in the other sections must be observed.
2.1 General
This operating manual contains general installation, operating and maintenance
instructions that must be observed to ensure safe operation of the system and
prevent personal injury and damage to property.
The safety information in all sections of this manual must be complied with.
The operating manual must be read and understood by the responsible specialist
personnel/operators prior to installation and commissioning.
The contents of this operating manual must be available to the specialist personnel
at the site at all times.
Information attached directly to the product must always be complied with and kept
in a perfectly legible condition at all times. This applies to, for example:
▪
Arrow indicating the direction of rotation
▪
Markings for connections
▪
Name plate
The operator is responsible for ensuring compliance with all local regulations not
taken into account in this operating manual.
2.2 Intended use
▪
The pressure booster system must only be operated within the operating limits
described in the other applicable documents.
▪
Only operate pressure booster systems which are in perfect technical condition.
▪
Do not operate partially assembled pressure booster systems.
▪
The pressure booster system must only handle the fluids described in the product
literature of the respective design variant.
▪
Never operate the pressure booster system without the fluid to be handled.
▪
Observe the information on minimum flow rates specified in the product
literature (to prevent overheating, bearing damage, etc).
▪
Observe the maximum flow rates indicated in the data sheet or product
literature (to prevent overheating, cavitation damage, bearing damage, etc).
▪
Do not throttle the flow rate on the suction side of the pressure booster system
(to prevent cavitation damage).
▪
Consult the manufacturer about any other modes of operation not described in
the product literature.
2.2.1 Prevention of foreseeable misuse
▪
Never exceed the permissible application and operating limits specified in the
product literature regarding pressure, temperature, etc.
▪
Observe all safety information and instructions in this manual.
2.3 Personnel qualification and personnel training
All personnel involved must be fully qualified to install, operate, maintain and
inspect the machinery this manual refers to.
The responsibilities, competence and supervision of all personnel involved in
installation, operation, maintenance and inspection must be clearly defined by the
operator.
Summary of Contents for Delta Eco SVP
Page 66: ......
Page 67: ......
Page 68: ...KSB B V Kalkovenweg 13 2401 LJ Alphen aan den Rijn Netherlands 1983 821 01 EN ...
