4 Description
14 of 32
AmaSlide
2553.870/01-EN
4.4 Configuration and function
1
2 3
4
7
10
8
6
5
9
11 12 13
Fig. 2:
AmaSlide in servicing position
1
Pump set
8
Guide plate with roller
2
Pump casing
9
Adapter, pump end
3
Fastener, discharge cover
10
Adapter, motor end
4
Back pull-out unit
11
Guide plate with roller
5
Power cable
12
Locking bolt in servicing position
6
Locking bolt in operating position
13
Locking bolt in servicing position
7
Guide rail
Design
AmaSlide is a maintenance aid for horizontally dry-installed pump sets (1) of the
Amarex KRT type series.
Function
After the discharge cover fasteners (3) have been removed from the pump casing (2),
the entire back pull-out unit (4) including motor can be removed from the pump
casing (2).
The back pull-out unit (4) including motor can be moved along the guide rails (7)
until it reaches the servicing position. Remove and re-position the locking bolts (6),
see locking bolts (12). The guide plates (11) are locked in the axial direction with the
locking bolts (12) and (13).
This (servicing) position is suitable for the following work:
▪
Inspecting the pump casing
▪
Removing any solids/stringy substances
▪
Checking for wear and replacing casing wear ring or wear plate if required
▪
Checking the O-rings at the discharge cover and replacing them if required
▪
Checking the impeller and discharge cover and replacing them if required
▪
Replacing the mechanical seal
4.5 Scope of supply
Depending on the model, the following items are included in the scope of supply:
▪
Maintenance aid
4.6 Dimensions and weights
For dimensions and weights refer to the overview “Combinations of pumps and
maintenance aids”.
