7.4 Dismantling the submersible mixer
7.4.1
General information/Safety regulations
WARNING
Work on the submersible mixer by unqualified personnel
Risk of personal injury!
▷
Always have repair and maintenance work performed by specially trained,
qualified personnel.
WARNING
Submersible mixer started up unintentionally
Risk of injury by moving parts!
▷
Always make sure the electrical connections are disconnected before carrying
out work on the submersible mixer.
▷
Make sure that the submersible mixer cannot be started up unintentionally.
WARNING
Hot surface
Risk of personal injury!
▷
Allow the submersible mixer to cool down to ambient temperature.
WARNING
Improper lifting/moving of heavy assemblies or components
Personal injury and damage to property!
▷
Use suitable transport devices, lifting equipment and lifting tackle to move
heavy assemblies or components.
WARNING
Fluids posing a health hazard
Hazard to persons and the environment!
▷
Submersible mixers used in fluids posing a health hazard must be
decontaminated.
▷
Wear safety clothing and a protective mask, if required.
▷
Observe all legal regulations on the disposal of substances posing a health
hazard.
WARNING
Components with sharp edges
Risk of cutting or shearing injuries!
▷
Always use appropriate caution for installation and dismantling work.
▷
Wear work gloves.
For dismantling and reassembly observe the general assembly drawing. (
⇨
Section 9.1
Page 43)
NOTE
All maintenance, service and installation work can be carried out by KSB Service.
Find your contact in the attached "Addresses" booklet or on the Internet under
"
www.ksb.com/contact
".
7 Servicing/Maintenance
34 of 54
Amamix
