4 Description of the Pump (Set)
18 of 126
Amacan K
1579.807/07-EN
4 Description of the Pump (Set)
4.1 General description
▪
Submersible pump in discharge tube
Pump set for handling river water and stormwater, pre-screened domestic and
industrial waste water as well as activated sludge
4.2 Product information as per Regulation No. 1907/2006 (REACH)
For information as per chemicals Regulation (EC) No. 1907/2006 (REACH), see
www.ksb.com/ksb-en/About-KSB/Corporate-responsibility/reach/
4.3 Designation
Example: Amacan K 800-400 / 60 6 UN G - IE3
Table 5:
Designation key
Code
Description
Amacan
Type series
K
Impeller type
K
Channel impeller
800
Nominal diameter of the discharge tube [mm]
400
Nominal impeller diameter [mm]
60
Motor size
6
Number of motor poles
UN
Motor version
UN
Non-explosion-proof, for fluid temperatures of up to
40 °C
XN
Explosion protection II 2G Ex db h IIB T3 Gb, for
fluid temperatures of up to 40 °C
YN
Explosion protection II 2G Ex db h IIB T4 Gb, for
fluid temperatures of up to 40 °C
G
Material variant
G
Impeller made of grey cast iron, standard variant
G1
Like G, with impeller made of duplex stainless steel
IE3
Motor efficiency classification
2)
-
3)
No efficiency classification
IE2
High Efficiency
IE3
Premium Efficiency
2
The IEC 60034-30 standard is not binding for submersible motor pumps. Efficiencies are calculated / determined
by analogy with the measurement method specified in IEC 60034-2. The marking is used for submersible motors
that achieve efficiency levels similar to those of standardised motors acc. to the IEC 60034-30 standard.
3
Blank
