KSB Ama-Drainer 4 Series Installation & Operating Manual Download Page 29

Page: 29 / 60

6 Commissioning/Start-up/Shutdown

29 of 60

Ama-Drainer 4../5..

Table 8:

Particle size for slightly contaminated waste water

Type series

Max. particle size

[mm]

Ama-Drainer /10

Ama-Drainer /11

Ama-Drainer /35

6.3 Shutdown/storage/preservation

6.3.1 Measures to be taken for shutdown

WARNING

Unintentional starting of the pump set

Risk of injury by moving components and shock currents!

▷

Ensure that the pump set cannot be started unintentionally.

▷

Always make sure the electrical connections are disconnected before carrying
out work on the pump set.

WARNING

Fluids handled, consumables and supplies which are hot and/or pose a health
hazard

Risk of injury!

▷

Observe all relevant laws.

▷

When draining the fluid take appropriate measures to protect persons and the
environment.

▷

Decontaminate pumps which handle fluids posing a health hazard.

1. Disconnect the pump from the power supply and protect it against start-up.

2. Wait until the pump has cooled down (10 minutes), then remove it.

3. Properly flush the pump.

Point the water jet on the pump's discharge nozzle.

4. Leave the pump to dry.

5. Store the pump vertically in a dark, dry and frost-proof room.

6.4 Returning to service

For returning the pump to service observe the sections on commissioning/start-up
and the operating limits.

In addition, carry out all servicing/maintenance operations before returning the
pump (set) to service.

NOTE

On pumps/pump sets older than 5 years we recommend replacing all elastomer
seals.

Summary of Contents for Ama-Drainer 4 Series





























































Search results

Summary of Contents for Ama-Drainer 4 Series

Reviews:

Related manuals for Ama-Drainer 4 Series

Brands by name

Popular brands

KSB Ama-Drainer 4 Series, Installation & Operating Manual

Search results

Summary of Contents for Ama-Drainer 4 Series

Reviews:

Related manuals for Ama-Drainer 4 Series

Brands by name

Popular brands