KSB Ama-Drainer 4 Series Installation & Operating Manual Download Page 7

Page: 7 / 60

1 General

7 of 60

Ama-Drainer 4../5..

1.6 Key to safety symbols/markings

Table 3:

Definition of safety symbols/markings

Symbol

Description

DANGER

DANGER

This signal word indicates a high-risk hazard which, if not avoided,
will result in death or serious injury.

WARNING

WARNING

This signal word indicates a medium-risk hazard which, if not
avoided, could result in death or serious injury.

CAUTION

CAUTION

This signal word indicates a hazard which, if not avoided, could
result in damage to the machine and its functions.

General hazard

In conjunction with one of the signal words this symbol indicates a
hazard which will or could result in death or serious injury.

Electrical hazard

In conjunction with one of the signal words this symbol indicates a
hazard involving electrical voltage and identifies information about
protection against electrical voltage.

Machine damage

In conjunction with the signal word CAUTION this symbol indicates
a hazard for the machine and its functions.

Summary of Contents for Ama-Drainer 4 Series





























































Search results

Summary of Contents for Ama-Drainer 4 Series

Reviews:

Brands by name

Popular brands

KSB Ama-Drainer 4 Series, Installation & Operating Manual

Search results

Summary of Contents for Ama-Drainer 4 Series

Reviews:

Brands by name

Popular brands