TA
2D
|2
CHANNEL
POWER
AMP
TA
2D
|OPERATING
INSTRUCTIONS
13
|
P a g e
CLEANING OF AMPLIFIER
The fitted mesh filters (foam) for the cooling system should be regularly cleaned to maximize the
air flow into the unit.
TRANSPORTATION
KS products are tools for daily professional use and are correspondingly robustly manufactured.
You should, however, be aware of these aspects of note:
As with all types of electronic devices, condensation and moisture must be avoided i.e. when the
speaker comes from a cold and humid truck and is brought into a warm venue, give the system as
much time as possible to heat up to venue temperature before powering on.
Of course, direct exposure to liquids is never safe and should be prevented at all times. The
vibrations of a transport vehicle are safe - all components and cabinetry are well assembled,
secured with screwed or bolted parts for extra strength where necessary.
It has however been shown that train or airplane transport without further packaging creates un-
due stress on KS products. We recommend for such situations shock resistant flight cases.
Significant contamination by dust, etc. is dangerous for Electronic assemblies as it may cause a
short circuit. It is therefore advisable, that the devices are periodically opened, and cleaned out
with compressed air.
