PERFORMANCES
Coffee temperature (50cc):
First coffee: 75°C
Subsequent coffees: 77°C
Coffee temperature adjustment: +/- 2°C in position 1 or 3
Steam (125cc of water at 15°C, 1 min): 77 +/- 5°C
Hot water (125cc): 85 +/- 5°C
TOOLING AND EQUIPMENT REQUIRED FOR DISASSEMBLY & RE-ASSEMBLY
- Tamper Torx TX - 10H magnetized screwdriver (cover)
- Small Pozidriv No.1 screwdriver (control electronics protective cover)
- Gripping pliers (high-pressure tube clamps).
- Vacuum cleaner with small nozzle for ground coffee (clogging)
- Small, flat-tip screwdriver (high-pressure hose clamps)
- No.2 male hexagonal "Allen" key (coffee filter)
- Antistatic wriststrap for work on electronic boards
DISASSEMBLY
Parts to be disassembled
Facing
panel
Cover
Body
Technical
Facing
Facing
mount
mount
Grinder
●
●
●
Tamping head
●
●
Control board
●
●
●
if necessary
replace board
Power board
●
●
●
Pump
●
●
●
Flowmeter
●
●
●
Thermoblock /
actuator
●
●
●
●
Fuses
●
●
●
●
Distributor
●
●
●
●
(
●
)
Steam nozzle
●
●
Coffee nozzle
●
●
Body: (provides visual access to most parts inside the coffee-maker)
Remove the facing panel (raise and disengage the 6 hooks).
Remove the coffee bean container.
Remove the cover (2 screws under the cup-rest lid + 1 screw under the coffee bean con 2 clips
at the rear removable by pulling on the rear cover rib.
(Do not remove the cup-rest lid or the or the cleaning tablet spout)
Remove the bottom 2 screws on the 2 rear screws in the base.
Slide the body towards the rear: this can only be done when the 2 rear screws have been completely
removed; vertically push back the cover which protects the electronic circuit.
Grinder
No particular instructions: see re-assembly.
Ring kept in place on the grinder bush by 4 clips.
2
Summary of Contents for XP7200 Series
Page 19: ...19...
